Dumas Model kit #1812.
This model kit requires assembly and painting. Cement and paint are not included.
Dumas DH-4 Park Flyer Kit.
FEATURES: Construction: Hand selected laser cut balsa
Vacuum molded cowl
Rudder and Elevator Control: Wire pushrod
Servo Placement: Mounted in rails on fuselage
Landing Gear: 1/16" diameter wire front, tail wire skid
requires bending
INCLUDES: All balsa, lightweight colored (blue and yellow) tissue covering,
two 2" (51mm) diameter plastic main wheels, tail wire skid,
CA hinges and all hardware to complete the kit, instruction manual,
two full-size plan sheets, and vacuum molded cowling.
REQUIRES: GWS IPS (indoor power system) motor with "A" ratio gear drive
GWSG2023
3 channel radio system (minimum)
3 micro servos
5A ESC w/BEC GWSM2059
2 cell 700mAh LiPo battery
GWS 8x6 prop, GWSQ2017
Building and field equipment
SPECS: Length: 25" (635mm)
Wingspan: 35" (889mm)
Wing Area: 329sq.in. (22.74 sq dm)
Airfoil: Flat bottom
Center of Gravity (CG): 1-13/16" (46mm) back from the leading edge
of the TOP wing
Control Throws-
Elevator, Up and Down: 5/8" (11mm)
Rudder, Left and Right: 3/4" (20mm)
