MTH 70-2112-1, One Gauge, F-7 AA Diesel Set w/Proto-Sound 3.0 - Southern Pacific

Write a Review
Does not apply
Calculated at Checkout
Diesel Locomotive
Digital or Analog
Boys & Girls
C-10 Mint-Brand New
1 Gauge
Country/Region of Manufacture:

F-7 AA Diesel Set With Proto-Sound 3.0 - Southern Pacific

Cab No. 6259, 6244


Product Catalog: 2013 RK1 Gauge Catalog
Product Line: RailKing One Gauge
Product Item Number: 70-2112-1
Delivery Status: Jan. 2016
Roadname: Southern Pacific

  • Intricately Detailed Polycarbonate Body
  • Detailed Truck Sides, Pilots and Fuel Tank
  • Moveable Roof Fans
  • Metal Body Side Grilles
  • (2) Engineer Cab Figures
  • Metal Wheels, Axles and Gears
  • (2) Hook & Chain Coupler Assemblies
  • Kadee Compatible Coupler Mounting Pads
  • (2) Remote Controlled Proto-Couplers
  • Prototypical Rule 17 Lighting
  • Directionally Controlled Constant Voltage LED Headlight
  • Lighted Cab Interior
  • Illuminated Number Boards
  • Lighted Marker Lights
  • Operating MARS Light
  • (2) Precision Flywheel Equipped Skew-Wound Balanced Motors In Each A Unit
  • Operating Smoke Unit
  • Onboard DCC Receiver
  • Locomotive Speed Control In Scale MPH Increments
  • 1:32 Scale Proportions
  • Proto-Sound 3.0 With The Digital Command System Featuring: Passenger Station Proto-Effects
  • Unit Measures:39" x 3 3/4" x 5 1/4"
  • Operates On R2 Curves Diesel DCC Features
  • Headlight/Taillight
  • Horn
  • Bell
  • Start-up/Shut-down
  • Passenger Station/Freight Yard Announcements
  • Lights (except head/tail)
  • Master Volume
  • Front Coupler
  • Rear Coupler
  • Forward Signal
  • Reverse Signal
  • Grade Crossing
  • Idle Sequence 3
  • Idle Sequence 2
  • Idle Sequence 1
  • Extended Start-up
  • Extended Shut-down
  • Rev Up
  • Rev Down
  • One Shot Doppler
  • Coupler Slack
  • Coupler Close
  • Single Horn Blast
  • Engine Sounds
  • Brake Sounds
  • Cab Chatter
  • Feature Reset
  • Smoke On/Off
  • Smoke Volume

The F-7 was the zenith of the "covered wagon," or carbody-style diesel. With 3,849 units built between 1949 and 1953, the F-7 was both the most popular carbody diesel and its last hurrah. By 1954 U.S. railroads had virtually stopped ordering F-units in favor of hood units like EMD's GP9 and Alco's RS-3. The side walkways of hood units offered better access for maintenance and better visibility for backup moves, making them truly universal locomotives useful for both mainline runs and road switching.

The F-unit, however, was, in Trains magazine editor David P. Morgan's words, "the diesel that did it" - retired the steam engine and changed railroading forever. The F-unit and its contemporaries were also the first standardized locomotive designs bought by American railroads since USRA steam engines. Whereas the steam engines of most railroads had a distinctive and easily-recognized "look," F-units were the same everywhere. But they had one great visual advantage over steam: their flat sides were like rolling billboards. Artists at EMD and the railroads responded with distinctive color schemes and, for the first time since the late 1800's, American locomotives became a riot of color in the postwar era.

Externally, the F-7 was very similar to the earlier F-3. The key spotting features that distinguished an F-7 were its stainless steel upper body grilles that replaced the "chicken wire" worn by most F-3s, and the rooftop dynamic brake fan that replaced the F-3's rectangular roof vents just behind the cab. Internally, the F-7 was also an evolution of the F-3. While horsepower was the same, new D27 traction motors allowed the F-7 to handle a heavier load.

Relive the sights, sounds, and drama of postwar railroading with this four-motored, full-scale 1:32 model. Throttle down to speeds as low as 3 scale miles per hour with any load, or roll along at the prototype's maximum speed of 102 mph with passenger gearing. Proto-Sound 3.0 offers authentic EMD 567 prime mover sounds, a first-generation diesel horn and bell, crew and station sounds, and adjustable smoke volume. The RailKing F-7 features the same level of superb detailing that characterizes our F-3, with added-on details that include legible builder's plates, grab irons, multiple-unit hoses, rooftop lift rings, see-through rooftop fans, steam generator exhaust stack (for passenger car heating), windshield wipers, and trucks with separately-applied spring hangers, brake cylinders, and air pipes. As with the F-3, each A-unit is supplied with two sets of pilots: a fully-detailed pilot with narrow coupler opening for wide-radius curves, and a less-detailed pilot with wide coupler opening for operation on tighter curves.